AutoCAD Plant 3D / Elem részletei
SANS Library

SANS Library

Micrographics
1 értékelés

Digitally signed app

Ingyenes
OPERÁCIÓS RENDSZER:
Nyelv:

Leírás

SANS (South African) pipes and fitting library for Autodesk® AutoCAD® Plant 3D.

The following item categories are included in the library:

Item Standard Classes Sizes
Gasket To suit flanges in SANS 1123 To suit flanges in SANS 1123 1.5mm / 3mm
Bolt Set To suit flanges in SANS 1123 To suit flanges in SANS 1123 To suit flanges in SANS 1123
Flange Blind - Type NP/8 - RF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 500
Flange Blind - Type NP/8 - FF SANS 1123  600; 1000; 1600; 2500; 4000 15 - 500
Flange SO Plate - Type NP/3 - RF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 600
Flange SO Plate - Type NP/3 - FF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 600
Flange Screwed - Type NP/4 - RF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 125
Flange Screwed - Type NP/4 - FF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 125
Flange Weld Neck - Type NP/2 - RF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 600
Flange Weld Neck - Type NP/2 - FF SANS 1123 600; 1000; 1600; 2500; 4000 15 - 600
Pipe SANS 62 Medium; Heavy 6 - 150
Pipe SANS 719 4.5; 5; 6; 8; 10; 12 200-1000
Elbow 90° - Short Radius SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Elbow 90° SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Elbow 45° SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Reducer Eccentric SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Reducer Concentric SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Tee SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Tee Reducing  SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Welding Caps SANS Compatible ANSI B 16.9 Sch 80; Standard To suit SANS 62 and 719
Nozzles To suit flanges in SANS 1123 To suit flanges in SANS 1123 To suit flanges in SANS 1123

 

Súgó dokumentáció elolvasása

Verzióinformáció

Verzió 0.5.2, 2021. 10. 20.
Initial release

Képernyőfelvételek és videók


Ügyfélértékelések

1 értékelés
Műszaki segítségnyújtás
  • Hello
    Yasar Vurmaz | december 14, 2021

    How can I adding this standart in my workspaces? 

    Pieter van der Westhuizen (Közzétevő) | december 22, 2021

    Hi Yasar, You can add the spec into your project as you would any other spec. In the Project Manager right click on the Pipe Specs and select Copy Specs to Project. Browse to where the .pspx file is saved. Once this is done you will be able to add it to your tool palette as per your other specs.

Ugrás a tetejére