Arrange
Win64, EnglishGeneral Usage Instructions
After installation, all commands are accessed via the Arrange tab or by typing their aliases in the command bar.
To use the "Align" commands (e.g. "Align Min X"), follow these steps:
- From the ribbon, choose Arrange tab ➪ Align panel ➪ Align Min X (you can also type the command AMINX in the command bar).
- At the Select control object or [Point] prompt: select the object you want to use as a reference object, or choose the Point option.
- In case of choosing the Point option, at the Specify control point prompt: pick a point you want to use as a reference point.
- At the Select objects for alignment prompt, select objects you want to align then press Enter (or right-click).
To use the "Distribute" commands (e.g. "Distribute Min X"), follow these steps:
- From the ribbon, choose Arrange tab ➪ Distribute panel ➪ Distribute Min X (you can also type the command DMINX in the command bar).
- At the Select objects for distribution prompt, select the objects you want to distribute then press Enter (or right-click).
To use the "Displace" commands (e.g. "Displace X"), follow these steps:
- From the ribbon, choose Arrange tab ➪ Displace panel ➪ Displace X (you can also type the command DIX in the command bar).
- At the Select control object prompt, select the object you want to use as a reference object.
- At the Select objects for displacement prompt, select objects you want to displace then press Enter (or right-click).
- At the Specify displacement prompt, enter your desired amount of spacing between objects. (you can also specify it directly on the screen)
To use the "Attract" commands (e.g. "Attract X"), follow these steps:
- From the ribbon, choose Arrange tab ➪ Attract panel ➪ Attract X (you can also type the command ATX in the command bar).
- At the Select control object or [Point] prompt, select the object you want to use as a reference object, or choose the Point option.
- In the case of choosing the Point option, at the Specify control point prompt, pick a point you want to use as a reference point.
- At the Select objects for attraction prompt, select the objects you want to attract then press Enter (or right-click).
- At the Attraction mode: [Predecessors/Successors] prompt, select the Predecessors option if you want the objects to be attracted before the control object or point, or select the Successors option if you want the objects to be attracted after the control object or point.
For detailed information, please refer to the documentation web page:
Screenshots
Commands
| Ribbon/Toolbar Icon | Command | Command Description |
|---|---|---|
|
AMINX |
Aligns the minimum x-coordinate edges of the bounding boxes of objects |
|
AMIDX |
Aligns the middle x-coordinate edges of the bounding boxes of objects |
|
AMAXX |
Aligns the maximum x-coordinate edges of the bounding boxes of objects |
|
AMINY |
Aligns the minimum y-coordinate edges of the bounding boxes of objects |
|
AMIDY |
Aligns the middle y-coordinate edges of the bounding boxes of objects |
|
AMAXY |
Aligns the maximum y-coordinate edges of the bounding boxes of objects |
|
AMINZ |
Aligns the minimum z-coordinate edges of the bounding boxes of objects |
|
AMIDZ |
Aligns the middle z-coordinate edges of the bounding boxes of objects |
|
AMAXZ |
Aligns the maximum z-coordinate edges of the bounding boxes of objects |
|
DMINX |
Distributes the minimum x-coordinate edges of the bounding boxes of objects |
|
DMIDX |
Distributes the middle x-coordinate edges of the bounding boxes of objects |
|
DMAXX |
Distributes the maximum x-coordinate edges of the bounding boxes of objects |
|
DSX |
Distributes the spacing between x-coordinate edges of the bounding boxes of objects |
|
DMINY |
Distributes the minimum y-coordinate edges of the bounding boxes of objects |
|
DMIDY |
Distributes the middle y-coordinate edges of the bounding boxes of objects |
|
DMAXY |
Distributes the maximum y-coordinate edges of the bounding boxes of objects |
|
DSY |
Distributes the spacing between y-coordinate edges of the bounding boxes of objects |
|
DMINZ |
Distributes the minimum z-coordinate edges of the bounding boxes of objects |
|
DMIDZ |
Distributes the middle z-coordinate edges of the bounding boxes of objects |
|
DMAXZ |
Distributes the maximum z-coordinate edges of the bounding boxes of objects |
|
DSZ |
Distributes the spacing between z-coordinate edges of the bounding boxes of objects |
|
ATX |
Attracts the x-coordinate edges of the bounding boxes of objects |
|
ATY |
Attracts the y-coordinate edges of the bounding boxes of objects |
|
ATZ |
Attracts the z-coordinate edges of the bounding boxes of objects |
|
RIPL |
Rotates objects around their own center points as base points. |
|
SIPL |
Scales objects around their own center points as base points. |
Installation/Uninstallation
For installation, download and double-click the app installer. After installation, you may need to restart the Autodesk product to activate the app.
To uninstall the app, exit the Autodesk product if it is running, double-click the app installer, and select the "Uninstall" button. OR, click Control Panel > Programs > Programs and Features (Windows 8.1/10/11) and uninstall the app from your system as you would ordinarily do for any other application.
Additional Information
For more information and apps, visit our website www.primocad.com.
Known Issues
Contact
Author/Company Information
Support Information
If you have any questions please contact us via contact@primocad.com.
Version History
| Version Number | Version Description |
|---|---|
|
2024 |
Compatible with AutoCAD 2024 |
|
2023 |
Compatible with AutoCAD 2023 |
|
2022 |
Compatible with AutoCAD 2022 Contains In-Place commands |
|
3.0.0 |
Latest release. Compatible with Autodesk® AutoCAD® 2021 |
|
1.1.0 |
Latest release. |
