featureMigrator
Digitally signed app
Bezpłatna
System operacyjny:
Język:
Opis
The featureMigrator will allow Autodesk® Inventor® users to more easily create part features from assembly features.
Users can migrate assembly features by selecting them in the featureMigrator browser by right-clicking on one or several of them, then use the “Send to Parts” commands.
Informacje na temat tej wersji
Wersja 19.0.5, 07.07.2021
Support for Inventor 2020
Note: coolOrange will not further develop the app or provide new versions for newer Inventor versions. featureMigrator for Inventor 2020 is the last version, which is published here. We reserve the right to remove the App from the Autodesk App Store at any time.
You can find the source code for featureMigrator on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-feature-migrator
Does anyone figure how to change the code for this add-in to work with INV2021 and above?
Thanks
I miss this app in 2021 Inventor.
Is a great disapoint that this app is not upgraded for Inventor 2021. It was a great tool.
Why coolOrange will not provide Feature Migrator for newer Inventor versions?! This tool could have been perfect and very helpful for me!
You can find the source code for featureMigrator on a public GitHub repository: https://github.com/coolOrangeLabs/inventor-feature-migrator Hope that helps. Markus-coolOrange
Such a great add on saves so much time!!
Straight to the point.
This app is FANTASTIC. It does exactly what it says. Thank you.
Jim
Great App, i was searching for this a long time!
Thank you CoolOrange
Полезное приложение, странно, что этот функция не встроена в программу.
Verry good app
Very useful thing
This is a great tool if you need to push features created at Assembly-level into the parts they affect. One thing that it could do with having though: The ability to push features into Frame-generated componentry. Also, a couple of the sample/help images above might as well not be there they are so small.
rapide et surtout plus réaliste avec cette petite application
Užitečný pomocník.
awsome tools, time saving, great job Orange!
Thanks a lot
It's very easy to use.
Works good except, small bug. You have to delete iMate first. When you forgot to do this, you can't close pop up window and you can't create trhread... It is necessary to close entire Inventor (2013)
I cannot believe this isn't built into Inventor like it is in Solidworks but this covers it superbly. I am hoping there will be a future option to send to a subassembly in addition to parts. Great app. Works flawlessly.
I can print now threads on my 3d printer! :D
Amaizing software!
Good day! Thank you very much. Very helpful in my work.
The reason I downloaded this tool was to reduce the time it took to create threads using revolves and cutting in coils. This tool makes things much quicker. However, when printing the threads, the tolerances may be a bit to tight.
Yes, you have to set a gap between the bolt and the hole with the thread depending on the tolerance of your printer.
Norman: When using the thread modeler, it does not matter the standoff of the hole in which you make the threads, it will produce the threads as they would be.
Hello, Really good, "clear" tool. Helpful in 3D print and for analysis purpose. Good Job
Really Useful and nice program
Realy great tool that saves a lot of time SolidWorks module better
It does what it promises, can save a lot of time. Thanks a lot.
Realy great tool that saves a lot of time
Excelent tool!
Helps a lot! Thanks
Works fine!
Hello, I'm fully satisfied with the Tool. Only remark, the "Tools" Button to start the Tool doesn't appear on the Assembly Tab, as described in help, but in the "Tools" tab (Inventor 2015)