Duct Pro

Win64, English

Micrographics

Duct Pro is a simple and affordable sheet metal duct design add-on for Autodesk® Inventor®. All parts are sheet metal parts with flat patterns which can be exported for manufacturing

Version History

General Usage Instructions

Install the Software, start Inventor and open an assembly.

Double click the "Duct Pro" icon on your desktop.

Follow the instructions of the Activation window. Once activated you can start inserting the duct components into your Inventor assembly.

Use the "Edit Part" icon on the main window to edit parts already inserted.

Activate the application by clicking the "Activate" button.

Screenshots

Commands

Installation/Uninstallation

The program can be uninstalled using the Windows "Programs and Features" Control Panel Window.

Additional Information

Known Issues

Not compatible with Windows XP. Please visit our website for an older version that supports Windows XP.

Contact

Company Name: Micrographics

Company URL: http://www.mgfx.co.za

Support Contact: ivtools@mgfx.co.za

Author/Company Information

Micrographics

Support Information

Email: ivtools@mgfx.co.za

Version History

Version Number	Version Description
11.0.0	11.0.0 What's New: <11.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to verify if your subscription is active* - [New] Inventor 2025 Compatibility <10.0.5> * No Activation required when upgrading from version 10.x.x * - [Fix] Fixed 'Number of Segments' parameter issue on some models. <10.0.4> - [Fix] Fixed Rectangular Reducing Bend model template. <10.0.2> - [Improved] Added 2 and 4 piece Cone option. - [Improved] Added 2 and 4 piece Pipe option. <10.0.1> - [Bug] Issue with template files fixed. <10.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to verify if your subscription is active* - [New] Inventor 2024 Compatibility <9.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2023 Compatibility - [Improved] More Circular Flange options added - 2-Piece and 4-Piece <8.0.1> * No Activation required when upgrading from version 8.x.x * - [New] Added an option to disable remembering the Destination subfolder setting on Project change. - [Bug] Fixed an issue in the Rectangular Cone model template. - [Bug] Fixed an issue where the Document Length units setting (inch or mm) was not changed for certain models. <8.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2022 Compatibility <7.0.2> * No Activation required when upgrading from version 7.x.x * - [Bug] Part Number assignment was fixed - Sub-components of all multipart Duct Pro models were given the same Part Number. <7.0.1> - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added <6.0.0> - Initial Beta Release
10.0.0	10.0.0 https://micrographicssa-my.sharepoint.com/:u:/g/personal/pieter_mgfx_co_za/EZrUW4DgKNhPuITGyFCdyUcB6XQOPyUJtUDQLxFLJdEL7g?e=5vZCCE&download=1 What's New: <10.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to verify if your subscription is active* - [New] Inventor 2024 Compatibility <9.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2023 Compatibility - [Improved] More Circular Flange options added - 2-Piece and 4-Piece <8.0.1> * No Activation required when upgrading from version 8.x.x * - [New] Added an option to disable remembering the Destination subfolder setting on Project change. - [Bug] Fixed an issue in the Rectangular Cone model template. - [Bug] Fixed an issue where the Document Length units setting (inch or mm) was not changed for certain models. <8.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2022 Compatibility
9.0.0	<9.0.0> - Inventor 2023 Compatibility - Added split circular flange model options <8.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2022 Compatibility <7.0.2> * No Activation required when upgrading from version 7.x.x * - [Bug] Part Number assignment was fixed - Sub-components of all multipart Duct Pro models were given the same Part Number. <7.0.1> - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added
8.0.0	What's New: <8.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - [New] Inventor 2022 Compatibility <7.0.2> * No Activation required when upgrading from version 7.x.x * - [Bug] Part Number assignment was fixed - Sub-components of all multipart Duct Pro models were given the same Part Number. <7.0.1> - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added
7.0.1	What's New: <7.0.1> * No Activation required when upgrading from version 7.x.x * - [Improved] Better way to define the sub-folder where the models will be saved - [Improved] The Default Inventor project file can now be used with Duct Pro - [Improved] Bug fixes - [New] Added option to clear Last Used model parameters - Set model parameters to default values <7.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - Inventor 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronized with the graphical illustration in the UI - Update notification mechanism was added <6.0.0> - Initial Beta Release
7.0.0	What's New: <7.0.0> * Activation Is Required - Please email us on ivtools@mgfx.co.za to check if your subscription is active* - Autodesk® Inventor® 2021 Compatibility <6.0.5> - Fixed an issue with the Pipe model that occurred if application units were set to Imperial <6.0.4> - Added an activation system - Implemented Ribbon changes - Improved the last filename saved mechanism - Added a Getting Started video - Fixed Branch Top Diameter that was incorrect - Add Getting Started video <6.0.3> - Correctly changed button name to "Round T-Connector" - Added the Round Flange Hole options as requested - Updated more of the UI main screen images - Added Inventor 2017 and 2018 Models - A limit of 2mm or 0.1in was implemented for Taper Lobster Weld Gap. <6.0.2> - Fixed the Lobster end segment seam angle rotation issue - Updated the UI main screen images (More work to be done here...) - Fixed the Branch model branch-angles - Added the Rectangular Flange inner and outer corner options as requested - Added the Rectangular Flange Hole options as requested - Added the Rectangular Blank outer corner options as requested - Fixed T-Connector naming issue <6.0.1> - Fixed Material detection when editing a part - The previously specified filename is now being saved and reused when the same component is selected - Rectangular Lobster parameters have been synchronised with the graphical illustration in the UI - Update notification mechanism was added <6.0.0> - Initial Beta Release
5.2.0	Added Inventor 2020 support.
5.1.0	Added Inventor 2019 support
5.0.0	Added Inventor 2018 support
4.0.0	Added Inventor 2017 support
3.6.0	Added Inventor 2016 support
3.5.3	Changed message when non-Duct Pro part was selected for editing.
3.5.2	Fixed a DXF Exporter bug
3.5.0	First Autodesk Exchange release.