Mortise and Tenon
試用
作業系統:
語言:
說明
Mortise and Tenon creates a mortise and tenon joint between two boards. This add-in allows you to specify the dimensions and location of the joint. It is particularly useful in woodworking.
Features:
- Adjustable depth and length of tenons.
- Support for dovetails.
- Number of tenons.
- Offsets from edges.
- Option to create tenons centered on the selected face.
- Offsets between mortises and tenons.
- Adjustable fillet radius.
- Option to create constrained geometry.
- Depth offset.
- Option to create even mortises and tenons.
- Option to specify a spacing between tenons.
- Support for polygonal faces.
試用版描述
The Mortise and Tenon trial is limited to a preview. You can buy a license at maciejrogowski.com.
I was just wondering, Would you consider updating this add on to be able to create blind mortise and tenons? I would like to create a mortise and tenon that is half the width of my material thickness.
Also it would be great if we could get an option for the diameter of our router bit, to create fillets on both the ends of the mortise and tenon so that it's accurately represented in the cam stage. These updates would certainly seal the deal for me to purchase this & I feel like others would benefit too. Thanks!!
In the current version 1.0.7, a blind mortise and tenon joint can be created like in the help article: https://maciejrogowski.com/mortise-and-tenon-help/single-mortise-and-tenon/ The newest version 1.1.0 supports inner and outer fillets. It will be available on Autodesk App Store in September.
Thanks for updating for new API.
I use this plugin mostly for steel plate joinery. I would love to see a full through-all mortise if the tennon lenght is less then material thickness.
(To add space for a weld beneath the surface)
Now I have to manually add a press/pull feature on all the tennons afterwards.
Obviously it would be great to be able to edit the full feature at once at any moment. But I can imagine this to be difficult.
Thanks heaps for this add in. Use it often.
A through mortise can be added with the depth offset set to the thickness of the board or larger, like in the article: https://maciejrogowski.com/mortise-and-tenon-help/through-mortise/ In the current version it is possible to modify mortises and tenons in the parameters table: https://maciejrogowski.com/edit-existing-mortise-and-tenon/
Does not appear to work for mortise and tenons on curved or faces that are not right angles. Ok otherwise with many options.
The newest version 1.0.7 supports polygonal faces.
Ich benutze das Addon schon eine Weile. Anfangs war es ein Problem die richtige Reihenfolge einzuhalten und manchmal funktionierte es nicht, wie ich wollte. Mittlerweile klappt es aber gut. Es liegt nur an der Reihenfolge der Plattenauswahl.
Toll ist dass man wirklich alle Varianten einstellen kann. Abstand von den Rändern, Tiefe, Breite alles. In Verbindung mit Nifty Dogbones klasse für die beliebten Verbindungen für Holzboxen Schubladen usw.
Very easy to use and makes adding jointery to drawing as simple as a couple clicks. Not only can it make mortise and tenon - you can also change setting to add dado and rabbet joints to drawings.
Also - I accidently purchased using the wrong emial. Pruchased again with the correct email. Kelly noticed the duplicate purchase and reached out to me and refunded one of the purchases.
This is worth every penny. I love it. Thank you!
Super Outil! fonctionne trés bien.
Dommage que les tenons et mortaise ne soit pas modifiable et qu'il ne ce mettent pas à jour.
The newest version 1.0.3 has a constrained mode. Mortises and tenons can be modified in the parameters table in the constrained mode. The joint can be updated with the compute spacing button, after changing the width of the board.