Project Salvador
Digitally signed app
Opis
Project Salvador (Beta) is an Autodesk® Fusion® add-in that provides access to third-party Generative AI models through the APIs. Use it for product design ideation, conceptual design variations and sketch creation in Fusion.
This add-in gives you the capability to create AI-generated images inside Fusion. After creating and adding the image to the canvas, you can use the image for further design inspiration or to automatically generate a sketch.
Watch:
Note: This add-in is compatible with the Autodesk Fusion version released on March 25, 2024, or later
Special Terms for Project Salvador v1 (Beta)
By using Project Salvador v1 (Beta) (“Software”), you and employees of your company (individually or collectively, “You”) agree to these Special Terms, the Autodesk Terms of Use (“TOU”) (including the Autodesk Acceptable Use Policy) and You also acknowledge the Autodesk Privacy Statement. The Software is considered “pre-release” software under Section 9 of the TOU. Autodesk reserves the right, without any further notice, to suspend or end Your access to the Software at any time for any reason.
This Software leverages services provided by OpenAI, Stable Diffusion and Vectorizer.ai (“Service Providers”). Such services are considered “Third-Party Material/Services” under Section 8.4 of the TOU. You acknowledge and understand that Your access and use of the Software are subject to Section 8.4 of the TOU, as well as such Service Providers’ applicable terms and policies (including their relevant terms of use and acceptable use policies), which are considered “Third-Party Terms” under Section 8.4 of the TOU. The Third-Party Terms for OpenAI, Stable Diffusion and Vectorizer.ai are linked at the following locations, respectively: https://openai.com/policies; https://platform.stability.ai/legal/terms-of-service; and https://vectorizer.ai/policies/terms.
By submitting text prompts or image prompts into the Software (“Input”), You acknowledge and understand that Service Providers may, under their Third-Party Terms, receive, process and preserve Your Input, and if required to do so by law or to protect the rights of others or for other reasons under their Third-Party Terms, may also disclose Your Input externally. You acknowledge that Your Input may also be used and disclosed for machine learning training purposes by the Service Providers under their Third-Party Terms. The Service Providers’ use and other activities in connection with the Input are subject to their Third-Party Terms, and the TOU does not alter such Third-Party Terms.
Additionally, You acknowledge and understand that the Service Providers will generate text or image content, which may contain content generated by AI tools (collectively, “Output”), based on Your Input. Autodesk is not responsible for any Output generated and presented to You, and the Output is subject to Section 14.2 of the TOU and the Service Providers’ Third-Party Terms. You acknowledge that the Output may not be confidential or unique and that the Service Providers may generate the same or similar Output for third parties.
hello! I have a little problem, when i put the canva image in a phased plane the sketch option give me an error
Hello. Thanks for letting us know. I'm an engineer for Project Salvador and want to reproduce the issue you are reporting. I need more information. Can you describe the workflow a little more? I don't know what you mean by "phased plane". Can you list the steps to take and describe the text of the error? If you want to email me please do, at phil dot eichmiller at autodesk dot com.
è fantastico
Hi,
For now, generating sketch is making a "vectorization" of the image but without any "constraints"...
Could it be possible to add a little more intelligence in the process and try to recognize some geometric features? lines, arcs, paralleles, symetry...? to make the sketch a litlle more editable/usable?
Thank you for using Project Salvador! Vectorization workflow is powered by the 3rd party partner's technology. We have passed on your feedback to them.
Hi, Yes, updating the plug-in with the 1.1.0 version solved the issue. MAny Thanks.
Hola , tengo la versión 1.1.0 , ahora para usar proyecto salvador me pide actualización ,¿ puede que aya una versión mas actualizada ? ¿como puedo actualizarla? , en lugar me figura Genérate sketch también dejo de funcionarme , por favor me podrían ayudar
Hi Noelia, version 1.1.0 is still the latest for the Project Salvador. You can try to re-install it if you have any problems. What version of Fusion are you running it with?
It was working well at the beginning but generating sketch from canvas image it does not work now.
Thanks for the review. I'm an engineer on the project. I'm curious what is giving you difficulty with the workflow and test it with your canvas images. If you would like to share the images you are trying to convert to sketch, please let me know and we can connect via email.
I guess That I have the same issue. I generate an image, place it on a plane and next try to vectorize it but no result... the generating sketch bar keep running...
Please make sure you have stable internet connection and use one of the generated images or a high-quality PNG for best results. There's a size limit for what you can send through the API (image file has to be less than 10MB and Length * Width must be less than 33,554,432 pixels (about 5700 * 5700)). So large dimensionally but low quality JPG would fail these conditions. Thank you for using Project Salvador!
I confirm, I've tried one or 2 times more, and again even if "project Salvador" is working ( text to image generation) the tracing one (Generate Sketch) don't. either using the Salvador's one or a canvas uploaded from computer. Th eimage is not "large" at all (374x374 pix) or is it too small? How can troubleshoot what's wrong?
Hi, Sorry, I'was using Fusion Insider and with this version it's not working... With the "regular commercial" version it's running nice... I don't know why...
Hi, Sorry once again... since my last post, I've updated my regular version to the 2.0.19725 (Jul 12) and now the "Generate Sketch" tool don't works again...
We have published an update to Project Salvador on Jul 15 that is compatible with the new version of Fusion released on July 16 and previous versions as well (since March). Please download the update and let us know if you encounter any issues.
Jean-Michel LE GOFF if you can share one of these images with me at phil dot eichmiller at autodesk dot com I'll be glad to test it.
Hi, Finally, updating the plug-in with the 1.1.0 version solved the issue. Many Thanks.
Pour le moment j'ai testé, j'ai essayé, testé plusieurs façon de dire les choses, mais par exemple une demande aussi simple que "dessine moi les contours d'un ane en 2d, juste les contours aucun remplissage aucun contours" il n'arrive pas a comprendre peu importe comment on demande ou comment on optimise.
Et autre chose ultra ennuyeux : les deux icones du Project Salvador prennent une place enorme sur la fenetre SOLID principal .... et aucun moyen de le déplacer dans un autre menu ou endroit moins génant, donc pour regagner la place, obligé de le désactiver ....
Je sais que c'est un début, et que c'est gratuit, mais pour le moment c'est tres peu exploitable
sencillamente util
Comentar que desde hace unos días el complemento ya no me funciona, fusion 360 se bloquea cuando está relizando el boceto de cualquier imagen. llevo ya 1 semana y había ido todo perfecto hasta ahora.
Thank you!
congratulation
A very useful tool that saves a lot of work to start a project.I had a bad experience at first because it didn't work correctly.But everything was solved by uninstalling fusion and reinstalling
Hi Jorge, thank you for sending your test images via email. Somebody on our team will reach out to you shortly. Have you tried using images that don't have checkered background? In some software packages that denotes a blank background layer but Fusion sees it as an additional geometry baked into the image.
A simply nice application to use. Powerfull converter tool with picture to create real editable and usefull 2d sktech feature!
Простая нейросеть впиленая в fusion. Генерирует картинки по запросу, обводит скетчи и что ещё вам надо?
i suggest adding a feature where you can combine an image and text input for sketch generation
Thank you