•If desired download and install HP SmartStream from https://support.hp.com/gb-en/drivers/hp-smartstream-software-for-hp-jet-fusion-3d-printers/15831735 (The correct installer is "HP SmartStream 3D Build Manager for HP Jet Fusion 3D Printer software package")

•(See "Setting up HP SmartStream" in the "Additional Information" section)

•Run Fusion 

•Load this AddIn (see "Additional Information" section)

•Open an existing Design or Create a Component in the “Design” Workspace

At this point, you have 2 options. You can either;

•Click the "Create HP Setup" button in the "SOLID" tab located in the "3D PRINT " panel of the Design Workspace.

•Select your printer from the “HP Printers” drop down menu in the “CREATE HP SETUP” dialog and press OK.

OR

•Switch to the "Manufacture" Workspace and activate the "Additive" Tab

•Open the "Setup" Dialog

•Create a new Setup (operation type = Additive) with any HP Machine in the Manufacture Workspace. The printer is in the "Fusion Library" list.

•The HP 3D Printers for Fusion AddIn supports all HP 3D Printers (Multi Jet Fusion 300, 500, 3200, 4200, 5200, 5400 and 5600 Printer Series, Metal Jet S100)

At this point, you have 2 options. You can either;

•Click the "Send to HP SmartStream" button in the "Additive" tab located in the "HP" panel of the Manufacture Workspace, if you installed the "HP SmartStream 3D build manager". This action will open HP SmartStream 3D build manager and load the job from Fusion for further processing and sending to the printer.

OR

•Click the “Connect and Print” button in the "Additive" tab located in the "HP" panel of the Manufacture Workspace. This action will open a new dialog where you will be able to type in the IP address of your HP 3D printer and connect to it directly from Fusion. Once connected you will be able to see the printer details, and warnings / Error messages coming back from the printer, your previous jobs on that printer. 

•Select your build source (Active Setup vs 3mf file). 

•Select a material.

•Select a print profile. At this point you can also customize your print profile if desired.

•Send the job directly to the printer.

•Monitor the progress using the “JOBLIST” tab

Windows:

Install:

Double-click the downloaded installer from Autodesk App Store to install the app/plug-in.

Uninstall:
You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.
Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Fusion.

Then

- go to 'Control Panel\Programs\Programs and Features', just as you would uninstall any other application from your system.

- OR, rerun the installer and select the "Uninstall" button.

Setting up HP SmartStream

Before using the "Send to HP SmartStream" option available in this AddIn you have to install the HP SmartStream Application:

• Navigate to https://support.hp.com/gb-en/drivers/hp-smartstream-software-for-hp-jet-fusion-3d-printers/15831735 with the web browser of your choice
• Download "HP SmartStream 3D Build Manager for HP Jet Fusion 3D Printer software package" located under the "Application-Solutions" dropdown
• Install the software and connect it to your printer
• see https://support.hp.com/us-en/drivers/selfservice/swdetails/hp-smartstream-software-for-hp-jet-fusion-3d-printers/15831735/swItemId/pl-224187-1 for details on installing and setting up

Starting the Add-In

The HP 3D Printers for Fusion Add-In can be started manually in the "Add-Ins" tab of the "Scripts and Add-Ins" dialog after installation by selecting the "HP_3DPrinters" Add-In and clicking the "Run" button. It is also possible to always start the Add-In on the startup of Fusion by checking the "Run on Startup" checkbox

Other Add-Ins you may want to use in conjunction with this Add-In:

3D Printing Essentials

https://apps.autodesk.com/FUSION/en/Detail/Index?id=1864820821708132049&appLang=en&os=Win64