1. Open Fusion 360 and either load a solid model or create one from scratch.

2. When the features of the model are set as desired, click on the drop-down menu for the Fusion 360 toolbar and switch to the “Design” view.

3. Select the "Tools" tab in the Design view.

4. Find the ADD-INS button and click on the drop-down menu for the button. The OMAX menu item listed there provides three unique modes:

    a. Send to IntelliCAM opens a copy of the solid model in Intelli-CAM.

    b. Send to IntelliCAM and Path opens a copy of the solid model in Intelli-CAM plus goes one step further by having IntelliCAM automatically create a tool path for the model.

    c. Send to MAKE automatically makes a tool path for the model and then loads the resulting tool path into Intelli-MAX MAKE.

Install:

The installer that ran when you downloaded this app/plug-in from Autodesk App Store has already installed the app/plug-in.

OR, simply double-click the MSI to install the app.

Uninstall:

You can unload the add-in without uninstalling it by clicking the "Stop" button when the add-in is selected in the list box on the "Add-Ins" tab of the "Scripts and Add-Ins" dialog.

Unchecking "Run on Startup" causes the add-in not to be loaded in future sessions of Fusion 360.

To uninstall this plug-in, exit the Autodesk product if you are currently running it, simply rerun the installer, and select the "Uninstall" button.

OR, you can uninstall it from 'Control Panel\Programs\Programs and Features' (Windows 7/8.1/10), just as you would uninstall any other application from your system.

This add-in requires that OMAX IntelliCAM* and OMAX IntelliMAX Software* be installed on the same PC as Fusion 360. Intelli-CAM requires Windows 10 64-bit.

(* Software is available only to OMAX and MAXIEM Abrasive Waterjet customers.  Please visit http://www.omax.com for more details.)