Slope Pattern with Benchs

Slope Pattern with Benchs

Win32 и Win64, Русский

ADSON A N BALBINO ENGENHARIA
Draw the slope pattern between two polylines. Configure the command through a dialog box to choose ticks interval, bench distance, and other options.

Общие инструкции по использованию

Type ADSLP in the command line and press enter or click on the ribbon button at the Add-ins tab.

Select the slope top polyline or press S and Enter to open the settings dialog box.

In the dialog box, you can define whether the pattern will be orthogonal to the bottom polyline (usually in cut slopes) or top polyline (usually in fill slopes), and the distance between pattern ticks. Also, you can choose to consider benchs. In this case, define the planned distance between benchs and the planned width of benchs, and the pattern will be drawn considering benchs, as the example screenshots. Set the options as you prefer and click OK.

After the set, dialog box, select the slope top polyline and then select the slope bottom polyline to draw the slope pattern as configured.

You can set the dialog box one time. The settings will remain saved while your file is open. Access the dialog box again only if you want to change the settings, by pressing S when the command starts.

Снимки экрана

Команды

Значок ленты/панели инструментов Команда Описание команды

ADSLP

Select the slope top polyline or press S and Enter to open the settings dialog box.

Установка/удаление

The installer that was run when you downloaded this app/plugin from the Autodesk App Store will start installing the app/plugin. OR, simply double-click the downloaded installer to install the app/plugin. You may need to restart your Autodesk product to activate the app/plugin. To uninstall this plugin, exit the Autodesk product if you are currently running it, simply rerun the installer and select the "Uninstall" button. OR click Control Panel > Programs > Programs and Features (Windows 7/8.1/10/11) and uninstall as you would any other system application.

Дополнительная информация

Известные проблемы

The app doesn't work fine by selecting closed polylines whether to slope top polyline or slope bottom polyline. In this case, is recommended to break the closed polylines and execute the app to each of them.

Контактные данные

Название компании: ADSON A N BALBINO ENGENHARIA
URL-адрес компании: https://www.adcad.com.br/
Контактные данные службы поддержки: adson.adcad@gmail.com

Информация о компании/авторе

ADSON A N BALBINO ENGENHARIA

Сведения о поддержке

For support write to adson.adcad@gmail.com

Журнал версий

Номер версии Описание версии

1.0.0

Added 2025 support.
Наверх