OS:
언어:

설명

The Grid Line add-in draws a grid line with automatic labeling.

This add-in allows you to specify line extension length, label text, label frame, and label text size.

To change default parameters, follow the command line keywords.

It has options for labeling at the start, end, or both of the grid line, extension length, label frame, and text size.

이 버전 정보

버전 2.1.0, 2024-09-03
1- Upgrade to .NET 8.0. 2- Autodesk® AutoCAD® 2025 compatibility. 3- Improvements in parameter selection.


스크린샷 및 비디오


고객 리뷰

15 리뷰
기술 도움말 보기
  • versiones anteriores
    Cristian Manuel | 8월 31, 2024 다운로드 확인 (이것은 무엇입니까?)

    NO Funciona en version de AutoCAD 2023

    Serbest Cihangir (게시자) | 9월 02, 2024

    Hello Cristian, Due to upgrading the plugin to .NET 8.0 to be compatible with AutoCAD 2025, it doesn’t work with AutoCAD 2024 and below.


  • versiones anteriores
    Cristian Rodriguez | 8월 31, 2024 다운로드 확인 (이것은 무엇입니까?)

    donde puedo encontrar las versiones anteriores

    Serbest Cihangir (게시자) | 9월 02, 2024

    Hello Cristian, Please write me by e-mail. I will try to help you for old versions.


  • tutorial
    fatahillah alra | 1월 24, 2024 다운로드 확인 (이것은 무엇입니까?)

    how to install ?

    Serbest Cihangir (게시자) | 1월 25, 2024

    Hello, Please read the help document for installation instruction.


  • How to get it working?
    Luiz Eduardo | 6월 21, 2023 다운로드 확인 (이것은 무엇입니까?)

    Hello, how to get this plugin working in C3D 2024? Thanks!

    Serbest Cihangir (게시자) | 6월 23, 2023

    Hello Luiz, This plugin designed especially for AutoCAD and its vertical products. So, it may not work on Civil 3D.

    Saif Ullah Khan | 4월 26, 2024

    As we can use Autodesk C3D as AutoCad 2023 by running it from start menu and try to install if this may help you in this way. Thanks


  • Lead CAD Designer
    Malik Shahzad | 2월 13, 2023

    Amazing and time saving


  • Good idea, but it needs to be improved:
    Petr Brui | 2월 17, 2022 다운로드 확인 (이것은 무엇입니까?)

    1. Panel for the classic interface. There is a button, but it needs to be searched for and installed through adaptation.

    2. Settings - text size, extensions and circles are returned to the preset after each command call. It would be nice if they were saved for at least the current session.

    3. Settings - preselect the layer for placing the axes.

    Serbest Cihangir (게시자) | 2월 20, 2022

    Hi Petr, Thanks for your valued suggestions. I have noted them for next releases.


  • Nice Plugin
    Abanoub Saeed | 11월 08, 2021 다운로드 확인 (이것은 무엇입니까?)

    Nice plugin and very useful for students


  • I come from China.
    黄 凡 | 10월 12, 2021 다운로드 확인 (이것은 무엇입니까?)

    I think you should release Simplified Chinese, which will be beneficial to the release of this plug-in.

    Serbest Cihangir (게시자) | 10월 13, 2021

    Hi, Thanks for your suggestion. I have note it for the next releases.


  • I need some help
    Valeria Peña | 1월 25, 2021 다운로드 확인 (이것은 무엇입니까?)

    Hi, I can´t find the tool in the add-ins tab.

    Serbest Cihangir (게시자) | 2월 08, 2021

    Hi Dear Valeria, In normally once you install the plugin, it's command icon places in Ribbon Menu Add-Ins tab. First of all, uninstall and reinstall the plugin. After install it, on first running AutoCAD, don't miss to accept warning about plugin load. But please note that; this plugin compatible for AutoCAD. If you try it with another AutoCAD based programs (AutoCAD Architecture, AutoCAD Mechanical, AutoCAD Electrical etc.) it may has problem, due to default plugin installation path.

    Serbest Cihangir (게시자) | 2월 25, 2021

    Hi Mark, due to LT doesn't support Autoloader mechanism, I think you can not run this plugin on it.


  • Good
    Aungko Hein | 1월 01, 2021 다운로드 확인 (이것은 무엇입니까?)

    NIce

    Serbest Cihangir (게시자) | 1월 04, 2021

    Thank you for your commnet.


  • please help!
    Patrick Neuwirth | 12월 24, 2020 다운로드 확인 (이것은 무엇입니까?)

    after installation I can't find the add-in in the toolbox or in the autocad folder. any idea how to fix this?

    Serbest Cihangir (게시자) | 1월 04, 2021

    Dear Patrick, You can find add-in's command icon in Ribbon Menu Add-ins tab.


  • FANTASTICA
    Paulo Ventura | 12월 08, 2020

    MUITO GRATO É UMA FERRAMENTA FANTASTICA.

    Serbest Cihangir (게시자) | 12월 10, 2020

    Thank you very much.


  • Useful Add In
    Dennis Collin | 12월 08, 2020 다운로드 확인 (이것은 무엇입니까?)

    Clear and easy to use function.

    Perhaps in afuture release provide an option to specify layer? And use an attributed block for Grid Line Annotation rather than separate objects.

    Also make it easier to align new gridlines from previous ones. Although this can be accomodated with a suitably set Grid Snap

    Serbest Cihangir (게시자) | 12월 10, 2020

    Thank you for your good comment and suggestions. I had some development plan for new release for a while. An attributed block for annotation was in my development plan. But layer specifying and aligning from existing grids are wonderful suggestion. Thank you.


  • Perfect!!!
    Carlos Zuriel Zacarias | 12월 07, 2020 다운로드 확인 (이것은 무엇입니까?)

    Realmente aprecio que hagas esto. Un gran ahorro de tiempo.  ¡Gracias!

    Domingo Martín P | 12월 08, 2020

    buen día, mi lapto me indica que es un virus peligroso....q cierto es?

    Serbest Cihangir (게시자) | 12월 10, 2020

    Thank you for Carlos's good comment. I would like to write answer for Domingo Martin P. First of all; all published plug-ins in Autodesk App Store are checked by Autodesk. So, you can trust to all plug-ins published here. I think your problem caused from your antivirus software that, many such software assumes executable files as possible virus by default.


  • GENIAL
    Eduardo Barreto | 12월 07, 2020 다운로드 확인 (이것은 무엇입니까?)

    GRACIAS

    Serbest Cihangir (게시자) | 12월 10, 2020

    Thank you.

맨 위로 이동